Drones by Motor 775 DC – Experiment Version

Drones by Motor 775 DC - Experiment Version



Drones by Motor 775 DC – Experiment Version Gemfan 1045 10×4,5 10 inch : https://bit.ly/3kxjxWz 775 Động cơ DC : https://bit.ly/34sTQB2 DC 6-90V 15A …

source

Recommended For You

About the Author: MR COVER

32 Comments

  1. this is a great example of DIY.
    However , these are stock motors from factory.
    im capable of modifying these motors to have 2 to 3
    times the RPM s and
    Torque power than what is shown here.
    there are many many tricks to achieve this and I know all of them.
    these motors are all running under
    10,000 RPNs.
    its not uncomon for me to build these motors to tirn above
    50,000 RPM s all day long .
    the design of the drone is what the problem is here.
    group these motors together at the center of the air frame
    and mount them there so that the center of gravity is centralized.
    tgen using belt drive
    run the propellers that way so no heavy weight is so on the edge if the airframe .
    this will also create a centeal GYRO effect which will stabalize the
    entire unit .
    or allow the morors to be vented and blow the air out of the pvc.
    pipe and use no open
    propellers.
    any questions???
    contact me.

Comments are closed.